A selection of 6 of our fresh roasted MEDIUM TO DARK coffee beans for you to try in biodegradable packing :)
Every coffee selection is intended to excite your taste buds, from single origin full Arabica beans to blends and the best Robustas on the market, you will enjoy a world of flavour.
Each pack consists of 100g of fresh roasted coffee beans. A perfect gift. Choose whole beans or select your preferred grind and we will take care of it.
One has to find ones Coffee :)
Thank You for your patronage.
Choosing your grind size guide.
Why Grind Size Matters?
Grind size effects 3 factors in coffee: contact time, extraction time, and flow rate.
The more surface area on the coffee bean, or how fine it is, the more exposure it has to water. And that water exposure decides everything.
The more surfaces that interact with water the less time it needs to be there (contact time). The more surface area to interact with water means the less time is needed for the water to extract components (extraction time).
Finally, grind size determines how fast, or slow, the coffee can physically move through the grounds (flow rate).
What This Means Is:
- The finer the beans are ground, the higher the extraction rate is and the less contact time is needed.
- Alternatively, the courser the beans are ground, the less surface is exposed, which means a slower extraction rate, therefore, more contact time is needed.
- The finer the grind, the slower the water can move through it. The courser the grind, the faster it can go through.
All of this is a long way of saying that if your brew method has a short contact time (like espresso), the grind size should be finer. If your brew method has a long contact time (like French Press) the grind size should be courser.
Over and Under Extraction
Why so much fuss about size? Because if you don’t grind your beans to the appropriate size for your brewing method you’ll have either over or under extracted coffee.
Over-extraction happens when too many coffee components have been absorbed from the bean, and unfortunately, too much of anything is almost always a bad thing. Over-extraction can make your coffee taste bitter.
Under-extraction is just as bad. This happens when not enough coffee components have been absorbed. The result is sour, acid, or even salty tasting coffee.
These consequences happen with the wrong grind size, If your grind size is uneven, as blade grinders are apt to make them, you can have both under-extracted and over-extracted coffee in the same cup.
How To Get The Grind Size Correct?
Equipment. You can’t get serious about home brewing coffee if you’re still pulverizing your beans with a blade grinder. Blade grinders don’t cut the beans into uniform sizes.
Also, the propeller action of the blade gets too hot which can scorch your beans. Both problems make a difference in how your cup tastes.
A burr grinder has a set of rotating “burrs” that crush the beans to the correct uniform size. If you don’t have a burr grinder or don’t want to buy yet another kitchen gadget, don’t fret. You can still grind your beans moderately well by pulsing the grinder, tracking the time, and eyeballing the consistency.
Here’s a general guide for what you’re looking for in 7 types of grind sizes.
Extra fine coffee grind should look like baby powder. To make extra-fine at home, use a burr grinder set all the way to the finest setting, or use a Turkish coffee bean mill.
Blade coffee grinders are not a good option because it isn’t equipped to grind the beans this fine. Another option is to head to your overlooked grocery store coffee aisle grinder. Set it to “extra fine,” “super fine,” or “Turkish” and let it do the work for you. Turkish coffee or Ristretto uses extra-fine coffee.
Fine ground coffee looks like regular table salt from your salt shaker. Drinks that use this type are espresso and stove-top Moka Pots.
Use a per grinder per its instructions, or if you only have a blade grinder available, add 2 tablespoons of coffee beans per cup, and pulse the grinder for about 15 to 20 seconds until the grinds just start clumping together.
Espresso is a drink where you really need your grind right, because a good shot is dependent on extraction time and density and the right grind will help with that.
Medium-fine ground coffee looks like powdery Caribbean beach sand. Cone shaped filters, either from automatic coffee makers or manual pour-overs utilize this type. There is a deeper layer of coffee grounds in a cone shaped filter than there is in a flat shaped filter.
This means that the water has more contact time with the grounds which means cone filters make a slightly stronger cup of coffee. Vacuum pots and siphon brewers also work well with this grind type.
Medium-Coarse coffee looks like regular sand— not the powdery Caribbean kind, but the more northern course variety. Automatic coffee makers with flat filters, some manual pour-overs, and Aeropress devices use this type of grind.
Medium grounds are your basic coffee grind texture which most people visualize when thinking of coffee grounds. This is a good starting point to test your grinding skills. Get to a medium grind, and then adjust from there to see how the texture changes from fine to course.
If you only have access to a blade grinder, pulse the coffee beans for about 10 to 15 seconds to get basic medium ground coffee.
Medium-Coarse coffee looks like kosher salt. You can actually start to see little bean flecks in the course grind types. Chemex and Cafe Solo devices recommend this grind size because the manufacturers believe it to allow the best extraction and flow rate for their products.
If the coffee is ground too fine the water won’t filter fast enough. If it’s ground too coarse, it will filter too fast and won’t pull the oils and good coffee components to give the best results.
Coarse ground coffee is getting rockier, with sharp edges, and bigger bean particles present. Coarse ground coffee should look like sea salt or coarse salt. The French Press is the most common device to use this size.
Your burr coffee grinder won’t be working very long to achieve this consistency, just a few seconds. If you only have access to a blade grinder, pulse the coffee beans for only 5 to 10 seconds to achieve the coarse ground coffee size.
On the opposite spectrum from Turkish or extra-fine grounds, extra-course is the chunkiest ground size. The coffee beans are spending just a few seconds in the grinder to break up the beans to an extra-course chunky size.
Coffee types that use extra-course grounds are cold brews and cold presses in which grounds spend an extended amount of contact time with the water. For comparison, the water contact time for espresso is about 30 seconds. Cold brews can be up to 12 hours or more.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Gaggia Magenta Plus
Simply the best performing "Milk Steamer" on an AUTOMATIC COFFEE MACHINE
Get that Latte, Cappuccino or Flat White with speed and performance.